Fujitsu 8.4 Manuale Utente

 

6

 

3.1  Preparation 

1.  Check that the operating system is installed correctly. 

2.  Check that the SCSI adapter is connected to the computer. 

3.  Check whether the SCSI driver and ASPI manager are installed correctly  and operating (For 

windows



 2000, 4.60 or later) 

Note   

 

Version 4.01 or later of the ASPI Manager is required.  Use Explorer or a similar program 
to check the version number of the WNASPI32.DLL file. 
  The environment setup tools described later can be used for checking. 

4.  If the previous version was installed, first confirm that it has been uninstalled (deleted). 

5.  Confirm that there is sufficient free space on the hard disk to install the software. 

 

3.2  Starting Installation 

1.  Start Windows. 

 

Note   

 

A user name with administrator authority must be used to log on to Windows(R) 2000 or 
Windows NT(R) 4.0.  
  Ask the system administrator for the details of logging on. 

2.  Close any other currently open applications. 

3.  Insert the setup CD-ROM in the CD-ROM drive.  Here, the CD-ROM drive is temporarily 

called "D:".  (If the environment you are using is different, replace the appropriate parts 
below.) 

4.  Double -click on "install.exe" in the "D: \Driver1\ASPI" folder of the CD-ROM using 

Explorer.  Then, installation starts. 

When an automatic start is specified, the start screen of the setup disk is displayed.  
Installation can be started from this screen too. 

5.  When the setup screen is displayed, continue the process by following the on-screen 

instructions. 

6.  Confirm that the following group is created when setup has been completed.  The displayed 

icon depends on the selection of "Components" during installation.