Visioneer 7700 Manuale Utente

V

ISIONEER

 P

HOTO

P

ORT

 7700 USB S

CANNER

 I

NSTALLATION

 G

UIDE

The orange light on the front of the scanner comes on indicating 
the scanner is receiving power.

Your computer recognizes that a scanner has been plugged into the 
USB port and automatically loads the appropriate software from 
the CD to run the scanner.

6. When the software is finished loading, click the Finish button.

A window appears as your computer builds a new driver database 
for the scanner software.

The scanner’s status light turns from orange to green when the 
scanner and computer are communicating properly. 

That completes the steps to connect your scanner to the computer.

7. You can also install the other software from the CD or view and 

print the User Guides.

When you’re finished, remove the CD from the computer and store 
it in a safe place.

The PhotoPort 7700 scanner software adds the scanner icon to the 
Windows taskbar (at the bottom right corner of the computer screen). If 
the scanner is properly connected, the scanner icon looks like the one in 
this figure. 

If the icon has a red X through it, the scanner is not properly connected. 
See the section, “If the Scanner Is Not Properly Connected” on page 10 
for the steps to fix the problem.

Note:  The locking tab protects the scanner’s scan head by holding it 
securely in position. Lock the scanner when transporting it from one 
location to another, but always remember to unlock it before 
scanning. The scanner will not scan when locked.

Scanner Icon