Honeywell IS4911 Manuale Utente

 

 

5

The -00 engine model includes two Ø .075" [1.9 mm] blind holes for mounting the engine with self-tapping 
screws.  The mounting holes are located on the bottom of the unit with an additional keying location point for 
engine alignment

.  

 

Warning:  The limited warranty (on page 31) is void if the following guidelines are not adhered to when 

mounting the engine.  

When securing the engine with self-tapping screws: 

•  Use M2.2 x 4.5 Philips pan head, type AB, Steel, zinc clear, Trivalent self-tapping screws. 

•  Do not exceed 1.75 +0.5 in-lb [2.02 +6 cm-kg] of torque during screw installation. 

•  Use a minimum mount thickness of 0.3 mm. 

•  Use safe ESD practices when handling and mounting the engine. 

 

Figure 4. IS4910-00 / IS4911-00 Dimensions