Honeywell 3800gPDF Manuale Utente

1 - 3

IBM SurePos

Scan one of the following “Plug and Play” codes to program the 3800gX5 for
IBM SurePos (USB Handheld imager) or IBM SurePos (USB Tabletop imager).

Note: After scanning one of these codes, you must power cycle the cash

USB HID

Scan the following code to program the 3800g for USB HID bar code scanners.
Scanning this code changes the terminal ID to 131.

USB Com Port Emulation

Scan the following code to program the 3800g to emulate a regular RS-232-
based Com Port. If you are using a Microsoft® Windows® PC, you will need to
download a driver from the Honeywell website (

www.honeywell.com/aidc

)

. The

driver will use the next available Com Port number. Apple® Macintosh comput-
ers recognize the imager as a USB CDC class device and automatically uses a
class driver. Scanning the code below changes the terminal ID to 130.

Note: No extra configuration (e.g., baud rate) is necessary.

CTS/RTS Emulation

IBM SurePos (USB Handheld Scanner) Interface

IBM SurePos (USB Tabletop Scanner) Interface

USB HID Bar Code Scanner

USB Com Port Emulation

* Off