Honeywell 3800gPDF Manuale Utente

2 - 1

If your interface is not a standard PC AT, refer to 

2-1 and locate the Terminal ID number for your PC.  Scan the Terminal ID bar 
code below, then scan the numeric bar code(s) from the 

inside the back cover of this manual to program the imager for your terminal ID.  
Scan Save to save your selection.  

For example, an IBM AT terminal has a Terminal ID of 003.  You would scan the 
Terminal ID bar code, then 0, 0, 3 from the 

 inside the back 

cover of this manual, then Save.  If you make an error while scanning the digits 
(before scanning Save), scan the Discard code on the 

scan the Terminal ID bar code, scan the digits, and the Save code again.

Note: After scanning one of these codes, you must power cycle your computer.

Terminal ID

Save