Honeywell 3800gPDF Manuale Utente

3 - 5

Scan the 

Hands Free Time-Out bar code, then scan the time-out duration 

(from 0-300,000 milliseconds) from the inside back cover, and 

Save.   Default = 

5,000 ms.

This sets the time period before the imager can read the 

same bar code a sec-

ond time.  Setting a reread delay protects against accidental rereads of the 
same bar code.  Longer delays are effective in minimizing accidental rereads at 
POS (point of sale).  Use shorter delays in applications where repetitive bar 
code scanning is required.  

Default = Medium.

Reread Delay only works when in automatic trigger mode or presentation mode 
(see 

If you want to set your own length for the reread delay, scan the bar code below, 
then set the delay (from 0-30,000 milliseconds) by scanning digits from the 
inside back cover, then scanning 

Save. 

Use the centering feature to narrow the imager’s field of view so the imager 
reads only the bar code you want.  When centering is turned on, the imager only 
reads codes that intersect or are contained within the centering window you set 
up.  At least part of a bar code must be within the window to be decoded or out-
put by the imager.

Hands Free Time-Out

Short (500 ms)

* Medium (750 ms)

Long (1000 ms)

Extra Long (2000 ms)

User-Specified Reread Delay