Honeywell 3800gPDF Manuale Utente

3 - 9

•

This exits without saving any Output Sequence changes.

When an output sequence is 

Required, all output data must conform to an 

edited sequence or the imager will not transmit the output data to the host 
device.  When it’s 

On/Not Required, the imager will attempt to get the output 

data to conform to an edited sequence, but if it cannot, the imager transmits all 
output data to the host device as is.

When the output sequence is 

Off, the bar code data is output to the host as the 

imager decodes it.  

Note: This selection is unavailable when the Multiple Symbols Selection is 

turned on.

Enter Sequence

Default Sequence

 Required

 On/Not Required

 * Off