Honeywell 3800gPDF Manuale Utente

4 - 2

Step 4. Determine the hex value from the 

on page A-2, for the prefix or suffix you wish to enter. 

Step 5. Scan the 2 digit hex value from the 

 inside the back 

cover of this manual.

Step 6. Repeat Steps 4 and 5 for every prefix or suffix character.

Step 7. To add the Code I.D., scan 5, C, 8, 0.

 To add AIM I.D., scan 5, C, 8, 1.
 To add a backslash (\), scan 5, C, 5, C.

Note: To add a backslash (\) as in Step 7, you must scan 5C twice – once to 

create the leading backslash and then to create the backslash itself.

Step 8. Scan Save to exit and save, or scan Discard to exit without saving.

Repeat Steps 1-6 to add a prefix or suffix for another symbology.

To send a CR (carriage return)Suffix for UPC only:

Step 1. Scan Add Suffix.

Step 2. Determine the 2 digit hex value from the Symbology Chart (included in 

Step 3. Scan 6, 3 from the 

 inside the back cover of this 

manual.

Step 4. Determine the hex value from the 

Step 5. Scan 0, D from the 

 inside the back cover of this 

manual.

Step 6. Scan Save, or scan Discard to exit without saving.

You can clear a single prefix or suffix, or clear all prefixes/suffixes for a symbol-
ogy.  When you Clear One Prefix (Suffix), the specific character you select is 
deleted from the symbology you want. When you Clear All Prefixes (Suffixes), 
all the prefixes or suffixes for a symbology are deleted.

Step 1. Scan the Clear One Prefix or Clear One Suffix symbol.

Step 2. Determine the 2 digit Hex value from the Symbology Chart (included in 

) for the symbology from which you want to clear the prefix 

or suffix.