Honeywell 3800gPDF Manuale Utente

7 - 8

Character pairs /M and /N decode as a minus sign and period respectively.
Character pairs /P through /Y decode as 0 through 9.

Code pages define the mapping of character codes to characters.  If the data 
received does not display with the proper characters, it may be because the bar 
code being scanned was created using a  code page that is different from the 
one the host program is expecting.  If this is the case, scan the bar code below, 
select the code page with which the bar codes were created from the chart, 

on page A-4, and scan the value and 

the SAVE bar code from the 

 inside the back cover of this 

manual.  The data characters should then appear properly.

< Default All Interleaved 2 of 5 Settings >

No Check Digit indicates that the imager reads and transmits bar code data 
with or without a check digit.

When Check Digit is set to Validate, but Don’t Transmit, the unit only reads 
Interleaved 2 of 5 bar codes printed with a check digit, but will not transmit the 
check digit with the scanned data.  

* Full ASCII Off

 Full ASCII On

Code 39 Code Page

*  On

Off