Honeywell 3800gPDF Manuale Utente

7 - 15

Scan the bar codes below to change the message length.  Refer to 

on page 7-2 for additional information.  Minimum and Maximum

lengths = 0-80.   Minimum Default = 0, Maximum Default = 80.

Code pages define the mapping of character codes to characters.  If the data 
received does not display with the proper characters, it may be because the bar 
code being scanned was created using a  code page that is different from the 
one the host program is expecting. If this is the case, scan the bar code below, 
select the code page with which the bar codes were created from the chart, 

on page A-4, and scan the value and 

the SAVE bar code from the 

 inside the back cover of this 

manual.  The data characters should then appear properly.

By default, Code 128 function codes are not transmitted with Code 128 bar 
code data.  However, if you wish to transmit Code 128 function codes with the 
bar code data, scan the Function Codes On bar code, below.

<Default All Telepen Settings>

Minimum Message Length

Maximum Message Length

Code 128 Code Page

* Function Codes Off

Function Codes On