Motorola DS3478 Manuale Utente

10 - 2 Symbol DS3478 Product Reference Guide

To perform wand emulation, connect the digital scanner cradle to a portable data terminal, or a controller that 
collects the wand data and interprets it for the host.

Attach the modular connector of the wand emulation interface cable to the cable interface port on the digital 
scanner cradle. See 

Connect the other end of the wand emulation interface cable to the wand port on the mobile computer or 
controller.

Ensure all connections are secure.

Pair the digital scanner to the cradle by scanning the bar code on the cradle.

Select the wand emulation host type by scanning the appropriate bar code from 

. 

To modify other parameter options, scan the appropriate bar codes in this chapter. 

Connect an external power supply if required.

Wand Port

Mobile

Computer

Interface Cable

Interface cables vary depending on configuration. The connectors may be different from those illustrated 
in 

, but the steps to connect the digital scanner cradle are the same. 

Disconnect the power supply before changing host cables or the digital scanner may not recognize the 
new host. 

Connect the cradle to a 5 volt decoder only. Connecting to a 12 volt decoder can cause damage and 
invalidate the warranty.