Multi-Tech Systems MVP810 Manuale Utente
Overview
MultiVOIP User Guide
16
E1 Front Panel LEDs
Because the MVP3010 and MVP30-60 both use a common main circuit
card or motherboard, the LED indicators are the same for both.
card or motherboard, the LED indicators are the same for both.
Figure 1-4. MultiVOIP MVP3010 Chassis
Active LEDs.
The MVP3010 front panel has two sets of identical LEDs.
In the MVP3010 as shipped (that is, without an expansion card), the
left-hand set of LEDs is functional whereas the right-hand set is not.
left-hand set of LEDs is functional whereas the right-hand set is not.
When the MVP3010 has been upgraded with an MVP30-60 kit, the
right-hand set of LEDs will also become active.
right-hand set of LEDs will also become active.
E1 LED Descriptions
MVP3010 Front Panel LED Definitions
MVP3010 Front Panel LED Definitions
LED NAME
DESCRIPTION
Power
Indicates presence of power.
Boot
After power up, the Boot LED will be on for about 10
seconds while the MVP3010 is booting.
seconds while the MVP3010 is booting.
RCV
Receive. Lights when receiving data on Ethernet
port.
port.
XMT
Transmit. Lights when transmitting data on
Ethernet port.
Ethernet port.
LNK
Link. When lit, VOIP “sees” the hub or network
via the Ethernet connection.
via the Ethernet connection.
COL
Collision. Lit when data collisions occur.