Motorola MS4404 Manuale Utente
11 - 40 Symbol MS4404/MS4407 Integration Guide
Set Lengths for Interleaved 2 of 5
Parameter # L1 = 16h, L2 = 17h
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for I 2 of 5 to any length, one or two discrete lengths, or lengths within a specific
range.
the code contains. Set lengths for I 2 of 5 to any length, one or two discrete lengths, or lengths within a specific
range.
•
One Discrete Length - Select this option to decode only I 2 of 5 symbols containing a selected length. Select
the length using the numeric bar codes in
the length using the numeric bar codes in
. For example, to decode only I 2
of 5 symbols with 14 characters, capture I 2 of 5 - One Discrete Length, then capture 1 followed by 4. To
correct an error or to change the selection, capture Cancel on
correct an error or to change the selection, capture Cancel on
•
Two Discrete Lengths - Select this option to decode only I 2 of 5 symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
selected lengths. Select lengths using the numeric bar codes in
. For
example, to decode only those I 2 of 5 symbols containing either 2 or 14 characters, select I 2 of 5 - Two
Discrete Lengths, then capture 0, 2, 1, and then 4. To correct an error or to change the selection,
capture Cancel on
Discrete Lengths, then capture 0, 2, 1, and then 4. To correct an error or to change the selection,
capture Cancel on
.
•
Length Within Range - Select this option to decode an I 2 of 5 symbol with a specific length range.
Select lengths using numeric bar codes in
Select lengths using numeric bar codes in
For example, to decode I 2 of
5 symbols containing between 4 and 12 characters, first capture I 2 of 5 - Length Within Range. Then
capture 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading zero). To correct an error
or change the selection, capture Cancel on
capture 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading zero). To correct an error
or change the selection, capture Cancel on
.
•
Any Length - Capture this option to decode I 2 of 5 symbols containing any number of characters within the
imager capability.
imager capability.
NOTE
Due to the construction of the I 2 of 5 symbology, it is possible for a scan line covering only a portion of the
code to be interpreted as a complete scan, yielding less data than is encoded in the bar code. To prevent
this, select specific lengths (I 2 of 5 - One Discrete Length - Two Discrete Lengths) for I 2 of 5 applications.
code to be interpreted as a complete scan, yielding less data than is encoded in the bar code. To prevent
this, select specific lengths (I 2 of 5 - One Discrete Length - Two Discrete Lengths) for I 2 of 5 applications.