Brother GT-%$! Manuale Utente
7. Troubleshooting
GT-541
102
7-3. Solving Application Problems
Problem
Cause
Solution
The image sent from Adobe
Illustrator 10 is printed 90 degree
rotated.
Illustrator 10 is printed 90 degree
rotated.
The Print Setup or
Document Setup is
not appropriate.
Document Setup is
not appropriate.
In Adobe Illustrator 10 follow the instruction
below, and then try to send the print data
again:
(1) Open "Print Setup" in the "File" menu.
(2) Select GT-541 as the printer, and then
click “OK”.
(3) Open "Document Setup" on "File" menu.
(4) Check "Use Print Setup".
(5) Confirm the "Orientation", "Width" and
"Height".
If they are not appropriate, correct them, and
then click "OK".
below, and then try to send the print data
again:
(1) Open "Print Setup" in the "File" menu.
(2) Select GT-541 as the printer, and then
click “OK”.
(3) Open "Document Setup" on "File" menu.
(4) Check "Use Print Setup".
(5) Confirm the "Orientation", "Width" and
"Height".
If they are not appropriate, correct them, and
then click "OK".
The image sent from Adobe
Illustrator CS is printed 90
degree rotated.
Illustrator CS is printed 90
degree rotated.
The Print Setup or
Document Setup is
not appropriate.
Document Setup is
not appropriate.
With Adobe Illustrator CS, landscape image
may not be printed properly. Correct the
setting following the instruction below, and
then try to send the print data again:
(1) Open "Print" in the "File" menu.
(2) Confirm that the Media Size is “Defined
by Driver”.
(3) Change the Media Orientation to the
portrait.
(4) If you are not changing the Platen size,
skip to step (8). If you want to change the
Platen Size, click “Setup…”, and then click
“Continue”.
Print window appears.
(5) Click “Preference”.
(6) Change the Platen Size in the Printer
Driver Window, and then click "OK".
(7) Click “Print” in the Print window.
(8) Confirm the preview, and then click
“Print” to send the data to your printer.
may not be printed properly. Correct the
setting following the instruction below, and
then try to send the print data again:
(1) Open "Print" in the "File" menu.
(2) Confirm that the Media Size is “Defined
by Driver”.
(3) Change the Media Orientation to the
portrait.
(4) If you are not changing the Platen size,
skip to step (8). If you want to change the
Platen Size, click “Setup…”, and then click
“Continue”.
Print window appears.
(5) Click “Preference”.
(6) Change the Platen Size in the Printer
Driver Window, and then click "OK".
(7) Click “Print” in the Print window.
(8) Confirm the preview, and then click
“Print” to send the data to your printer.