Grizzly G0528 Manuale Utente

-10-

G0528 Sliding Router Table

Metal  components  are  often  coated  with  a  wax
or  oil  to  prevent  rusting  during  shipment.  Clean
all  coated  parts  with  a  solvent  cleaner  or  cit-
rus-based  degreaser  such  as  Grizzly’s  G7895
Degreaser. To clean thoroughly, some parts may
need to be removed.

For optimum performance

from your machine, make sure you clean all

moving parts or sliding contact surfaces that

are coated. Avoid chlorine-based solvents as

they may damage painted surfaces should they
come in contact.

Gasoline and petroleum

products have low flash

points and could explode

if used to clean machin-

ery. DO NOT use gasoline

or petroleum products to

clean the machinery.

Smoking near solvents

could ignite an explosion

or fire and cause serious

injury. DO NOT smoke

while using solvents.

Lack of ventilation while

using solvents could

cause serious person-

al health risks, fire, or

environmental hazards.

Always work in a well

ventilated area to pre-

vent the accumulation

of dangerous fumes.

Supply the work area

with a constant source

of fresh air.

Unsupervised children and

visitors inside your shop

could receive serious per-

sonal injury. Ensure child

and visitor safety by keep-

ing all entrances to the

shop locked at all times.

DO NOT allow unsuper-

vised children or visitors

in the shop at any time.

Weight Load

The Model G0528 weighs 125 lbs. Most shop
floors should be sufficient to carry the weight of
the machine. Reinforce the floor if you question
its ability to support the weight.

Working Clearance

Working  clearances  can  be  thought  of  as  the
distances between machines and obstacles that
allow  safe  operation  of  every  machine  with-
out  limitation.  Consider  existing  and  anticipated
machine needs, size of material to be processed
through  each  machine,  and  space  for  auxiliary
stands or work tables. Also, consider the relative
position of each machine to one another for effi-
cient material handling.

Lighting And Outlets

Lighting  should  be  bright  enough  to  eliminate
shadow and prevent eye strain. Electrical circuits
should  be  dedicated  or  large  enough  to  handle
the  amperage  draw.  Outlets  should  be  located
near each machine so power or extension cords
are clear of high-traffic areas. Observe local elec-
trical codes for proper installation of new lighting,
outlets, or circuits.

Site Considerations

Clean Up