Kenwood CMOS-300 Manuale Utente

|

CMOS-300/CMOS-200

above because of the danger of malfunction due to high 
temperatures.)

•  Before drilling any mounting holes always check behind 

where you want to drill the holes. Do not drill into the gas 
line, brake line, electrical wiring or other important parts.

•  If this unit is installed in the passenger compartment, anchor 

it securely so it does not break free while the car is moving, 
and cause injury or an accident.

•  If this unit is installed under a front seat, make sure it does not 

obstruct seat movement. Route all leads and cords carefully 
around the sliding mechanism so they do not get caught or 
pinched in the mechanism and cause a short circuit.

•  When the product gets dirty, wipe dry with a silicon cloth or 

soft cloth. If it is seriously stained, remove stain with a cloth 
moistened with a neutral cleaner and then wipe the cleaner 
away. Do not use a hard cloth and/or a volatile substance 
such as lacquer thinner or alcohol, scratches, deformation, 
degradation and/or damage may result.

•  When a lens component gets dirty, wipe gently with a soft 

clock moistened with water. Do not rub with a dry cloth to 
prevent scratching the lens.

  To prevent a short circuit, remove the key from the 

ignition and disconnect the 

- battery.

  Make the proper input and output wire connections 

for each unit.

  Connect the wiring harness wires in the following 

order: ground, ignition, reverse and camera unit.

  Connect the wiring harness connector to the power 

supply box unit.

  Install the unit in your car.

 Reconnect the 

- battery.

2WARNING

•  If you connect the ignition wire (Red) to the car chassis 

(Ground), you may cause a short circuit, that in turn may 
start a fi re. Always connect those wires to the power source 
running through the fuse box.

•  Do not cut out the fuse from the ignition wire (Red). The 

power supply must be connected to the wires via the fuse.

 

2CAUTION

•  If your car’s ignition does not have an ACC position, connect 

the ignition wires to a power source that can be turned on 
and off  with the ignition key. If you connect the ignition wire 
to a power source with a constant voltage supply, as with 
battery wires, the battery may die.

•  If the fuse blows, fi rst make sure the wires aren’t touching to 

cause a short circuit, then replace the old fuse with one with 
the same rating.

2WARNING

•  To prevent a short circuit, never put or leave any metallic 

objects (such as coins or metal tools) inside the unit.

•  Installation and wiring of this product require specialist 

skill and experience. To assure your safety, please request a 
specialist technician to install the unit.

2CAUTION

•  Make sure to ground the unit to a negative 12V DC power 

supply.

•  When replacing a fuse, only use a new fuse with the 

prescribed rating. Using a fuse with the wrong rating may 
cause your unit to malfunction.

•  Do not use your own screws. Use only the screws provided. If 

you use the wrong screws, you could damage the unit.

•  This product is a rear view camera for checking the view at 

the rear of a car.

•  A rear view camera is a camera that provides symmetrical 

images in the same way as rear and side view mirrors.

•  Connection to a TV with an RCA video input is possible, 

but confi rm whether the TV you use has a reverse gear 
connection function.

•  This product is designed to supplement the driver’s rear 

view, but the camera images do not show all dangers and 
obstacles. Be sure to look behind you when reversing to 
confi rm the view.

•  This product features a wide-angle lens, so the near view 

is wide and the far view is narrow, which may create a false 
sense of distance. Be sure to look behind you when reversing 
to confi rm the view.

•  Do not wash your car with an automatic car wash or high-

pressure water as it may result in water entering the camera 
or the camera falling off .

•  Check camera bracket installation before driving.
  Are the screws loose?

-  Is the camera bracket fi rmly secured?
-  If the rear view camera comes loose while you are driving it 

may cause an accident.

•  Before fi nally installing the unit, connect the wiring 

temporarily, making sure it is all connected up properly, and 
the unit and the system work.

•  When mounting this unit, make sure none of the leads are 

trapped between this unit and the surrounding metalwork or 
fi ttings.

•  Do not mount this unit near the heater outlet, where it would 

be aff ected by heat, or near the doors, where rainwater 
might splash onto it. (Never install in locations such as the