IBM GC34-5557-00 Manuale Utente
PCF Commands
MQSeries programmable command format (PCF) commands allow you to
program administration tasks into an administration program. For a complete
description of the PCF commands and how to use them, see the MQSeries
Programmable System Management book.
program administration tasks into an administration program. For a complete
description of the PCF commands and how to use them, see the MQSeries
Programmable System Management book.
Working with MQSeries
If you are new to MQSeries for AS/400, you are recommended to set up a test
system. Then you can verify that you have installed the product correctly and
perform some basic MQSeries operations.
system. Then you can verify that you have installed the product correctly and
perform some basic MQSeries operations.
To set up a test system you need to create a queue manager and a local
queue. As an introduction to MQSeries for AS/400, create these objects with
CL commands from the command line, and work through the AS/400 panels.
queue. As an introduction to MQSeries for AS/400, create these objects with
CL commands from the command line, and work through the AS/400 panels.
Creating a Queue Manager
1.
Issue the CRTMQM command from the command line and press F4. The
screen shown in Figure 1 appears.
screen shown in Figure 1 appears.
If the screen does not appear, it may be that you have not installed
MQSeries for AS/400 correctly. If this is the case, delete the product as
described in “Deleting MQSeries for AS/400, V5.1” on page 31. Then
reinstall the *BASE product and try the CRTMQM command again.
MQSeries for AS/400 correctly. If this is the case, delete the product as
described in “Deleting MQSeries for AS/400, V5.1” on page 31. Then
reinstall the *BASE product and try the CRTMQM command again.
Create Message Queue Manager (CRTMQM)
Type choices, press Enter.
Message Queue Manager name . . .
__________________________________________
______
Text ’description’ . . . . . . .
Text ’description’ . . . . . . .
*BLANK____________________________________
___________________________________
Trigger interval . . . . . . . .
Trigger interval . . . . . . . .
999999999__
0-999999999
Undelivered message queue . . .
*NONE_____________________________________
______
Default Transmission queue . . .
Default Transmission queue . . .
*NONE_____________________________________
______
Maximum handle limit . . . . . .
Maximum handle limit . . . . . .
256________
1-999999999
Maximum uncommitted messages . .
10000______
1-10000
Default Queue Manager . . . . .
*NO
*YES, *NO
Bottom
F3=Exit
F4=Prompt
F5=Refresh
F12=Cancel
F13=How to use this display
F24=More keys
Parameter MQMNAME required.
Parameter MQMNAME required.
Figure 1. CRTMQM panel
Before you Start
Chapter 5. Using MQSeries for AS/400, V5.1
37