Polycom 1725-22886-001/A Manuale Utente

Pagina di 24
Setting Up the Polycom Instructor RP
14
To calibrate the touch screen for Camera 4:
1.
On the Polycom remote control, press 
 
Camera and select 4.
— If you have an integrated PC or a guest 
laptop, you will see the video from the PC 
or laptop as well as the whiteboard icon in 
the upper right corner of the screen.
— If you do not have an integrated PC or a 
guest laptop, you will see a blank 
whiteboard except for the whiteboard 
icon in the upper right corner of the 
screen.
2.
Pick up a pen from the SMART tray.
3.
Press the 
 Keyboard button on the 
SMART tray to bring up the calibration 
screen.
4.
Use the pen to touch the center of the 
crosshair on the upper left of the screen.
If the PIP appears on the screen, use the 
remote control to turn it off because it can 
hide the crosshairs.
5.
Use the pen to touch the center of the 
crosshair on the lower right of the screen.
6.
Use the pen to touch the center of the 
crosshair on the upper right of the screen.
7.
Draw on the screen to check that the 
calibration worked correctly.
8.
Do one of the following:
— If you have an integrated PC or a guest 
laptop, you will see a blank whiteboard 
except for the whiteboard icon in the 
upper right corner of the screen. Click the 
whiteboard icon and then continue by 
repeating steps 2 through 7.
— If you do not have an integrated PC or a 
guest laptop, continue with the Install the 
section on page 15.
CALIBRATE TOUCH SCREEN
TOUCH UPPER LEFT TARGET
CALIBRATE TOUCH SCREEN
TOUCH LOWER RIGHT TARGET
CALIBRATE TOUCH SCREEN
TOUCH UPPER RIGHT TARGET