Toshiba IK-TF5C Manuale Utente
25
About 1
µ
s
Exposure period*
2
Exposure period*
2
Trigger*
1
Negative polarity mode
Positive polarity mode
RGB data
(video interval image)
(Internal VD)*
3
FVAL
LVAL,
DVAL
DVAL
20H (Partial scanning OFF)
18H (Partial scanning 120fps)
23H (Partial scanning 180fps)
18H (Partial scanning 120fps)
23H (Partial scanning 180fps)
(1. 2) 1 Pulse Trigger SYNC-NON RESET Picture Output Timing (at Time of Internal Sync)
*1: Externally input signal
*2: Exposure time is determined by the setting of "7. 2 (1.3) Changing each setting in E.TRG mode".
*3: Video is output at the falling edge of the internal VD following completion of the exposure period.
The video and FVAL/LVAL/DVAL have a paired relationship.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trig-
ger, there will be an effect on the video.
ger, there will be an effect on the video.
#IK-TF5C_EN.p65
06.11.30, 3:44 PM
Page 25
Adobe PageMaker 6.5J/PPC