Toshiba TOSHIBA NB100 Manuale Utente
4.7 System Board, DC-IN, RJ-45 Cable and Blue-Tooth Card 4 Replacement Procedures
4.7 System Board, DC-IN, RJ-45 Cable and Blue-Tooth Card
Removing the System Board, DC-IN, RJ-45 Cable and Blue-Tooth Card
NOTE: Be careful of the eject button for the PC card. It can be damaged when removing
the board. Make sure it is securely installed.
the board. Make sure it is securely installed.
Remove the DC-IN, RJ-45 Cable and Blue-Tooth Card according to the following
procedures and Figure 4-15, 4-16.
procedures and Figure 4-15, 4-16.
1. Remove the DC-IN cable from CN5 on the system board.
2. Remove the RJ-45 cable from CN511.
3. Remove one M 1.6 x 4 black flat-head screw on Blue-Tooth card.
4. Remove the Blue-Tooth cable from CN10 on the system board.
5. Remove the Blue-Tooth Card on system board.
6. Remove the MIC rubber on the system board.
RJ45 cable
M1.6 x 4 black flat-head screw
Blue tooth card
Blue tooth rubber
CN10
MIC rubber
DC-IN cable
CN5
CN511
Figure 4-15 Removing the system board
TOSHIBA NB100 Maintenance Manual 4-27