Omega CNiS16 Manuale Utente
ENTER COMMUNICATION OPTION MENU:
Press
a
1) Press
a, if necessary, until CNFG prompt appears.
Press
d
2) Display advances to
INPT Input Menu.
Press
a
3) Press
a, if necessary, until display advances to COMM
Communication Options Menu.
Press
d
4) Display advances to
C.PAR Communication Parameters
Submenu.
If Communication Option is not installed, the display shows
NONE and skips to the Color Display Menu.
NONE and skips to the Color Display Menu.
COMMUNICATION PARAMETERS SUBMENU:
Allows the user to adjust Serial Communications Settings of the instrument.
When connecting an instrument to a computer or other device, the
Communications Parameters must match. Generally the default settings
(as shown in Section 5) should be utilized.
When connecting an instrument to a computer or other device, the
Communications Parameters must match. Generally the default settings
(as shown in Section 5) should be utilized.
Press
d
5) Display advances to
BAUD Baud Submenu.
BAUD SUBMENU:
Press
d
6) Display flashes previous selection for
BAUD value.
Press
b
7) Scroll through the available selections:
300_, 600_, 1200_,
2400_, 4800_, 9600_, 19.2K.
Press
d
8) Display shows
STRD stored message momentarily and then
advances to
PRTY only, if it was changed, otherwise press a to
advance to
PRTY Parity Submenu.
PARITY SUBMENU:
Press
d
9) Display flashes previous selection for “Parity”.
Press
b
10) Scroll through the available selections: NO, ODD, EVEN.
Press
d
11) Display shows
STRD stored message momentarily and then
advances to
DATA only, if it was changed, otherwise press a to
advance to
DATA Data Bit Submenu.
DATA BIT SUBMENU:
Press
d
12) Display flashes previous selection for “Data Bit”.
Press
b
13) Scroll through the available selections: 7-BIT, 8-BIT.
Press
d
14) Display shows
STRD stored message and then advances to
STOP only, if it was changed, otherwise press a to advance to
STOP Stop Bit Submenu.
51