ZyXEL 336M 91-003-192001B Manuale Utente

ZyXEL P-336M User’s Guide

Chapter 5 Tools

72

Use the Syslog screen to configure to where the P-336M is to send logs.

Click Tools > Syslog. 

DST Start

Configure the day and time when Daylight Saving Time starts if you selected 

Enable Daylight Saving. The Time field uses the 24 hour format. Here are a 

couple of examples:
Daylight Saving Time starts in most parts of the United States on the first Sunday 

of April. Each time zone in the United States starts using Daylight Saving Time at 2 

A.M. local time. So in the United States you would select 1st, Sun, Apr and select 

2 am in the Time field.
Daylight Saving Time starts in the European Union on the last Sunday of March. 

All of the time zones in the European Union start using Daylight Saving Time at the 

same moment (1 A.M. GMT or UTC). So in the European Union you would select 

the last Sun, Mar. The time you select in the Time field depends on your time 

zone. In Germany for instance, you would type 2 because Germany's time zone is 

one hour ahead of GMT or UTC (GMT+1). 

DST End

Configure the day and time when Daylight Saving Time ends if you selected 

Enable Daylight Saving. The Time field uses the 24 hour format. Here are a 

couple of examples:
Daylight Saving Time ends in the United States on the last Sunday of October. 

Each time zone in the United States stops using Daylight Saving Time at 2 A.M. 

local time. So in the United States you would select the last Sun, Oct and select 2 

am in the Time field.
Daylight Saving Time ends in the European Union on the last Sunday of October. 

All of the time zones in the European Union stop using Daylight Saving Time at the 

same moment (1 A.M. GMT or UTC). So in the European Union you would select 

the last Sun, Oct. The time you select in the Time field depends on your time 

zone. In Germany for instance, you would type 2 because Germany's time zone is 

one hour ahead of GMT or UTC (GMT+1). 

Automatic Time 

Setting

Enable NTP 

Server

Select this option to have the P-336M get the time and date from the Network 

Time Protocol (NTP) time server you specified below.

NTP Server Used

Enter the IP address (in dotted decimal notation) of the time server or select one 

from the pre-defined list. 

Set the Date and 

Time Manually

These fields display when you clear the Enable NTP Server checkbox. 

Current Gateway 

Time

This field displays the current system time and date. 

Year/ Month/ Day/ 

Hour/ Minute/ 

Second

Set these fields to configure the system date and time. 

Copy Your 

Computer’s Time 

Settings

Click this button to get the system date and time from your computer. 

Table 29   Tools: Time (continued)