Grizzly H8192 Manuale Utente

Model H8192 1" Belt/8" Disc Combo Sander

-19-

SECTION 4: OPERATIONS

Damage to your eyes and lungs could result

from using this machine without proper

protective gear. Always wear safety glasses

and a respirator when operating this

machine.

Loose hair and clothing

could get caught in

machinery and cause

serious personal injury.

Keep

loose

clothing

and long hair away from

moving machinery.

NOTICE

If you have never used this type of machine

or equipment before, WE STRONGLY

RECOMMEND that you read books, trade

magazines, or get formal training before

beginning any projects. Regardless of the

content in this section, Grizzly Industrial

will not be held liable for accidents caused

by lack of training.

Operation Safety

Disc Sanding

Always keep the workpiece on the left side

of the wheel that rotates down toward the

table. This will keep the workpiece from

flying out of your hands due to kickback.

To use the sanding disc:

1. DISCONNECT THE SANDER FROM

POWER!

2. Adjust the angles of the disc sanding table

and the miter gauge for your operation.

3. Connect the sander to power, turn it ON, and

allow it to reach full speed.

4. Place the workpiece on the table and firmly

against the miter gauge.