Grizzly P9933021 Manuale Utente
Model P9933021 Spindle Upgrade Kit
-2-
5
. remove the inner table insert, as shown in
Figure 4.
Figure 4. Inner table insert removed.
6
. Using a brass drift or block of wood and a
hammer, loosen and remove the cover, as
shown in
shown in
Figure 5.
Figure 5. removing cover.
4
. remove the cutter spindle using the spindle
wrench, as shown in
Figure 3.
Figure 3. removing spindle.
Figure 2. Cutter spindle fully elevated.
To install the upgrade kit components:
1
. DISCONNECT THE SPINDLE SHAPEr
FrOM POWEr!
2. remove the spindle guard.
3. raise the cutter spindle all the way up, as
shown in
Figure 2, and engage the spindle
lock.