Delta 31-140 Manuale Utente

4

machine is in use. If removed for maintenance 

purposes, use extreme caution and replace the 

guards immediately when maintenance is complete.

15. Make sure the sander is firmly secured before use.
16. Check damaged parts. Before further use of the 

machine, a guard or other part that is damaged 

should be carefully checked to determine that it will 

operate properly and perform its intended function. 

Check for alignment of moving parts, binding of 

moving parts, breakage of parts, mounting and any 

other conditions that may affect its operation. A guard 

or other part that is damaged should be properly 

repaired or replaced.

17. Provide for adequate space surrounding work area 

and non-glare, overhead lighting.

18. Keep the floor around the machine clean and free of 

scrap material, oil and grease.

19. Keep visitors a safe distance from the work area. 

Keep children away.

20. Make your workshop child proof with padlocks, 

master switches or by removing starter keys.

21. Give your work undivided attention. Looking around, 

carrying on a conversation and “horse-play” are 

careless acts that can result in serious injury.

22. Maintain a balanced stance at all times so that you 

do not fall or lean against the sanding disc or other 

moving parts. Do not overreach or use excessive 

force to perform any machine operation.

23. Use the right tool at the correct speed and feed rate. 

Do not force a tool or attachment to do a job for 

which it was not designed. The right tool will do the 

job better and safer.

24. U s e   r e c o m m e n d e d   a c c e s s o r i e s ;   i m p r o p e r 

accessories may be hazardous.

25. Maintain machinery with care. Follow instructions for 

lubricating and changing accessories.

26. Turn off the machine before cleaning. Use a brush or 

compressed air to remove dust or debris — do not 

use your hands.

27. Do not stand on the machine. Serious injury could 

occur if the machine tips over.

28. Never leave the machine running unattended. Turn 

the power off and do not leave the machine until it 

comes to a complete stop.

29. At all times hold the stock firmly.
30. Do not use this sander for other than it intended use. 

If used for other purposes, DELTA® Power Equipment 

Corporation. disclaims any real or implied warranty 

and holds itself harmless for any injury or damage 

which may result from that use.

Familiarize yourself with the following safety notices used 

in this manual:

This means that if precautions are not heeded, it may 

result in minor injury and/or possible machine damage.

This means that if precautions are not heeded, it may 

result in serious injury or possibly even death.