Clarke CFP-200 Manuale Utente
Page -18 -
Clarke
®
Operator's Manual
- CFP Polisher
HOW TO PREPARE THE MACHINE FOR
OPERATION
OPERATION
UNCRATE THE MACHINE
When the machine is delivered, carefully inspect the
shipping carton and the machine for damage. If
damage is evident, save the shipping carton so that
it can be inspected. Contact the Clarke Customer
Service Department.
shipping carton and the machine for damage. If
damage is evident, save the shipping carton so that
it can be inspected. Contact the Clarke Customer
Service Department.
KNOW YOUR MACHINE (Figure 1)
1
Operator Handle Grips
2
Switch Lever Safety Lock Button
3
Switch Levers - Squeeze - ON / Release -
OFF
OFF
4
Handle Release Compression Lever
5
Power Cord
6
Operator Handle
7
Cord Hook
WARNING!
This machine contains mov-
ing parts. To reduce the risk
of injury, always unplug the
power cord before servicing.
ing parts. To reduce the risk
of injury, always unplug the
power cord before servicing.
INSTALLING THE BRUSH OR PAD HOLDER
Align the lugs with the corresponding slots in the
brush or pad holder and turn the brush or pad holder
counterclockwise to lock it in place (figure 2). To
remove brush/pad holder, give it a quick, hard turn
clockwise.
brush or pad holder and turn the brush or pad holder
counterclockwise to lock it in place (figure 2). To
remove brush/pad holder, give it a quick, hard turn
clockwise.
CAUTION!
Using the wrong brush or pad
on this machine can damage
the floor or overload the
motor.
on this machine can damage
the floor or overload the
motor.
Figure 1
Figure 2
4
3
1
5
7
Lugs
Slots
LENGÜETAS
RANURAS
TENONS
FENTES
2
6