Southbend SB1019 Manuale Utente

-20-

For Machines Mfg. Since 8/09

Model SB1019

Refer to Figure 14 and the following 

descriptions to become familiar with the basic 

controls and components used to operate this 

machine.

A.  Blade Tension Knob: Adjusts the position of 

the upper blade wheel to apply or release 

blade tension.

B.  Guide Post Knob: Locks the guide post in the 

position set by the operator.

C.  ON/OFF Switch: Turns the saw motor ON & 

OFF. 

D.  Speed Selector: Selects one of three blade 

speeds.

E.  Downfeed Rate Adjust Knob: Controls the 

speed at which the blade lowers into the 

workpiece.

F.  Downfeed Valve: Controls the starting and 

stopping of the headstock downfeed. 

G.  Downfeed Stop Bolt: Adjusts to determine 

the absolute bottom limit of blade travel.

H.  Headstock 0° Flip Stop: Provides an optional 

stop for square cuts.

I.  Headstock 45° Stops: Provide stops at 45° to 

the left and right for angle cuts.

J.  Vise Jaw Handwheel: Controls the vise jaw 

movement. 

K.  Vise Jaw Quick Release Lever:  Quickly 

opens and closes the vise jaw approximately 

1

⁄

16

" for repetitive repositioning/clamping in a 

production setting.

L.  Headstock Lock Lever: Locks the headstock 

at the position set by the operator.

M.  Work Stop:  Provides an adjustable stop for 

cutting multiple workpieces at the same 

length.