Grizzly H7583 Manuale Utente

H7583 Tenoning Jig

-7-

The  Model  H7583  was  carefully  packed  when  it
left  our  warehouse.  If  you  discover  the  machine
is  damaged  after  you  have  signed  for  delivery,
please  immediately  call  Customer  Service  at
(570) 546-9663 for advice.

Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the con-
dition of your shipment, you should inventory the
contents.

Wear safety glasses dur-

ing the entire set up pro-

cess!

This jig presents seri-

ous injury hazards to

untrained users. Read

through this entire man-

ual to become familiar

with the controls and

operations before using

this jig!

Unpacking

Set Up Safety

SECTION 2: SET UP

Inventory

After all the parts have been removed from the

two boxes, you should have the following items:

Box 1: (Figure 1)

Qty

A. Work Plate Assembly and Base ................. 1

B. Clamp Assembly ........................................ 1

C. Clamp Handle ............................................. 1

D. Clamp Arm ................................................. 1

E. Push Handles w/Flat Washer ..................... 2

Figure 1. Tenoning jig inventory.

Hardware and Tools

Qty

•

Lock Washer 10mm ................................... 2

•

Fender Washer 8mm ................................. 1

•

Cap Screw M8-1.25 x 50mm ..................... 1

•

Cap Screw M10-1.5 x 25mm ..................... 1

•

Cap Screw M10-1.5 x 20mm ..................... 1

•

Hex Wrenches 2.5, 3, 4, 6, 8mm ..........1 Ea