KUHN RIKON 10" Cabinet Saw Sliding Table Manuale Utente
13
Locking and Unlocking the Slide Table
Keep the sliding table locked when
not in use. Failure to do so could cause serious
injury.
not in use. Failure to do so could cause serious
injury.
To lock the sliding table, pull the locking pin out-
ward, twist and insert pin into the locking hole in
the table carriage. (Fig. 22)
ward, twist and insert pin into the locking hole in
the table carriage. (Fig. 22)
To unlock the sliding table, pull the locking pin out-
ward, twist and rest the cross pin into the seat of
the lock knob body. (Fig. 22)
ward, twist and rest the cross pin into the seat of
the lock knob body. (Fig. 22)
Operation
Figure 20
Figure 21
Figure 22
WARNING
!
Adjustment
Slide Table Clearance to Saw Blade
1. Place a square on the front edge of the sliding
table. (A-Fig. 20)
table. (A-Fig. 20)
2. Push the sliding table until the top of the square
clears the back edge of the leading tooth on the
saw blade. (B-Fig. 20)
clears the back edge of the leading tooth on the
saw blade. (B-Fig. 20)
3. If the square does not clear the back edge of
the leading tooth on the saw blade, loosen the two
locking knobs under the slide table. Move the table
support forward or backwards until the aligment is
correct. (A-Fig. 21)
the leading tooth on the saw blade, loosen the two
locking knobs under the slide table. Move the table
support forward or backwards until the aligment is
correct. (A-Fig. 21)
Locking knob
A
B