Panasonic EY6813-U1 Manuale Utente
![Panasonic](https://files.manualsbrain.com/attachments/8f677e63fb64cbb6c62d09e6242996e7631380a8/common/fit/150/50/34d700d3fb727c767799b2da5cc474b219c0a4312e9e3044c99491a2fb9a/brand_logo.png)
4.2. CHECK POINTS FOR MECHANISM BLOCK.
< TROUBLE >
< CHECK >
< REMEDY >
Does not hammer
<CHECK INTERMEDIATE SHAFT ASSEMBLY.>
NO Replace
or weakness of
→ Check the wear condition of the change clutch and spring.
→ intermediate
hammering.
shaft assembly.
↓OK
<CHECK RECIPROCATION BEARING.>
NO Replace universal
Check the smooth action between reciprocation bearing
→ coupling.
and universal coupling.
↓OK
<CHECK PISTON AND HAMMER BLOCK.>
NO Replace piston
Check the wear condition of inside of piston and hammer
→ assembly and
O-ring.
greasing.
↓OK
<CHECK STRIKER.>
NO Replace spindle
Check the smooth action of striker.
→ assembly.
↓OK
<CHECK INTERMEDIATE SHAFT ASSEMBLY.>
NO Replace
Check the wear condition on tooth for change gears.
→ intermediate shaft
assembly.
Does not drill.
<CHECK BEARING.>
NO Replace H/D
→ Check the condition of bearing for H/D handle.
→ handle.
↓OK
<CHECK O-RING.>
NO Replace spindle
Check the wear condition for O-rings assembled with
→ assembly.
striker.
↓OK
<CHECK RECIPROCATION BEARING.>
NO Replace
Confirm the coming and going operation when rotating the
→ intermediate shaft
intermediate shaft with DRILL mode.
assembly.
It is OK if the reciprocation bearing does not operate.
↓OK
<CHECK STRIKER.>
NO Replace spindle
Check the smooth action of striker.
→ assembly.
Does not change
<CHECK BEARING.>
NO Replace H/S
the speed.
→ Check the condition of bearing for H/S handle.
→ handle.
↓OK
<CHECK INTERMEDIATE SHAFT ASSEMBLY.>
NO Replace
Check the wear condition for both change gear “H” and "S".
→ intermediate shaft
assembly.
7
EY6813-U1