Garmin nüvi 660 Europe 901063 Manuale Utente

U

sinG

 

The

 fM T

ransMiTTer

The FM transmitter is intended to transmit your nüvi’s audio to your FM stereo.
Do not adjust your FM settings while you are driving your vehicle. 
When searching for an appropriate FM frequency on your FM stereo, look for an 

unused frequency that has steady, consistent static. If you hear slight noises and 

sounds in the background of the static, choose a different frequency.
As you travel, you might need to change the frequency for the FM transmitter. 

A frequency not used by a radio station in your area might be used by a station 

elsewhere. 
As you drive, you may notice changes in the background static even though there 

is no FM station using that channel. You may notice this as you drive through 

intersections where certain kinds of traffic lights or other municipal electronic 

systems are operating. You might also notice this effect when the terrain changes, 

allowing distant stations to be received by your car stereo that were not received 

when you made your initial frequency selection. These and other sources of electrical 

interference may make it necessary to look for another frequency. 
The distance between the 12-Volt adapter, the nüvi, and the FM stereo antenna may 

also affect the noise level. Vehicles with antennas located far away, such as a rear-

mounted antenna, may experience more interference from outside noise sources than 

vehicles with front-mounted antennas.