Grizzly T10275 Dépliant

Introduction

The wood hand plane is a simple tool that is
designed to shape wood or clean up edges for
joinery.

Your  hand  plane  features  a  hardwood  body,  a
steel blade (also called an iron) and a brass frog
with a knurled lock knob for locking the blade in
place.  To  achieve  the  best  results  when  using
your specific type of hand plane, we recommend
reading  books  and  magazines,  and  researching
the internet.

Inventory

A. Plane .......................................................... 1

B. Blade .......................................................... 1

C. Frog ............................................................ 1

MODEL T10264/T10268/

T10274/T10275

HAND PLANE

INSTRUCTIONS

Setting the Blade

1. Insert the frog beveled-edge down into the

throat until it stops on its own or until the
groove in the top of the frog engages the pin,
as shown in

Figure 1.

HdaZ

7aVYZ

;gd\

AdX`@cdW

I]gdVi

E^c

7ZkZa

Figure 1. Example of blade secured with frog

and lock knob.

2. Orient the bevel of the blade for the type of

planing you intend, insert the blade below the
frog, then set the blade below the sole of the
plane (see

Figure 1) for the initial cut.

3. Tighten the knurled lock knob to secure the

blade.

4. Verify that the blade is parallel with the sole—

so an even amount of the blade protrudes
from one side to the other.

— If the blade is not parallel to the sole,

loosen the lock knob and adjust the blade
as needed. One side will cut more than
the other if the blade is not parallel to the
sole.

To reduce the risk of injury when using this

tool:

•

Use care when handling the plane blade.

It is sharp and can cause lacerations.

•

Protect your eyes from flying chips by

wearing safety glasses.

•

Make sure the workpiece is properly

secured.

•

Use both hands to guide the plane over

the workpiece.

•

Keep the plane away from children.

WARNINg: NO PORTION OF THIS MANUAL MAy BE REPRODUCED IN ANy SHAPE

OR FORM WITHOUT THE WRITTEN APPROvAL OF gRIzzLy INDUSTRIAL, INC.

#Bl13383 PrInTEd In ChIna