Grizzly G7298 Manuale Utente

H4378/H4379 Slimline Bench Grinder

-11-

The 

is a number that refers to the size of

the abrasive grain in the wheel. The lower the
number, the coarser the wheel. 10 is a very
coarse wheel for roughing and 220 is usually the
upper range for fine finish work.

is an indication of the hardness of the

wheel—“A” being the softest and “Z” being the
hardest.

refers to the type of bonding material

used to hold the abrasive material. Most general
purpose wheels will have a “V” indicating Vitrified
Clay is used. Vitrified Clay provides high strength
and good porosity. The other common bond type
is “B” for resin where synthetic resins are used.
These are used to grind cemented carbide and
ceramic materials.

There may be other numbers inserted that have
meaning for a particular type of wheel. Refer to
the manufacturer’s technical data for a complete
explanation. 

The Model H4378 only accepts Type-1 wheels
with a 

1

⁄

2

" bore. The Model H4379 only accepts

Type-1 wheels with a 

5

⁄

8

" bore. 

Aluminum oxide and silicon carbide wheels are
marked in a somewhat uniform manner by all the
major manufacturers. Understanding these mark-
ings will help you understand the capabilities of
various wheels. Always refer to the manufactur-
er’s grinding recommendations when selecting a
wheel for your project.

The basic format for wheel numbering is:

The 

is the manufacturer’s designation for a

particular type.

The most common 

used are A for

Aluminum Oxide and C for Silicon Carbide, and
occasionally SG for Seeded Gel.