RedMax BC2601DL Manuale Utente

■

1. Loosen the bolts temporarily attached to

the clutch housing.

2. Push the driveshaft toward the gearcase

and rotate it by hand to check that the
driveshaft is engaged with the gears.

3. Insert the shaft tube into the clutch

housing until it bottoms. When difficult to
engage, twist the engine slightly.

4. Align the positioning holes on the clutch

housing and the shaft tube and fit the boss
on the clamp into the holes. And fasten
the bracket with 2 bolts securely.

■

• Mount the handle to the shaft tube and

clamp it at your best operating position.

■

• Put the debris guard on the shaft tube near

the gear box, attach it with the 2 screws
and hardware provided.

■

1. Remove the air cleaner cover.

2. Connect the end of the throttle wire to the

joint on the top of the carburetor.

■ 

• Connect the switch wires between the

engine and the main unit. Pair the wires of
the same color.

■ 

1. While locking the gear shaft by inserting

the attached bar into the upper holder and
the gear box,  loosen and remove the
hexagon bolt(left-handed)

2. Fit the spacer attached to the head

assembly between the upper and lower
holders. Then screw in the cutting head to
the gear shaft over the holders. Hand-
tighten it securely.

❲

❳