McCulloch MT 305 Manuale Utente

Pagina di 9
2
1
Meaning of symbols marked on the product
Read the user manual before using the machine
Whenever the machine is in use, safety glasses
must be worn to safeguard against flying objects.
Hearing protection must also be used in order to
protect to operators hearing. If the operator is
working in an area where there is a risk of falling
objects a safety helmet must also be worn.
Keep people or animals at least 15m away from
the machine during operation
112
15m(50ft)
Warning! Cutting elements continue to rotate
after the engine turned off
Warning! Hot surface
Wear gloves to protect your hands
Warning: Rotating blades
112
Beware of thrown objects
Acoustic power level LWA accordance with
directive 2000/14/EC + 2005/88/EC
Maximum rotational frequency of the spindle for
cutting head
Maximum rotational frequency of the spindle for
blade
Wear foot protection
1. FOLLOW  ALL WARNINGS  and  instructions  regard-
ing operation and blade installation.
2. BLADE  CAN  VIOLENTLY  THRUST  AWAY  FROM
MATERIAL  IT  CANNOT  CUT 
-  Blade  thrust  can
cause serious injury. Keep people and animals 50
feet (15 metres) away in all directions. If blade cona-
cts foreign objects during operation, turn off engine 
and allow coasting blade to stop.Then check blade 
for damage.Always discard blade if it is warped or 
cracked.
3. BLADE THROWS OBJECTS VIOLENTLY - 
Wear eye, face, and leg protection. Always clear 
work area of any foreign objects before using blade. 
Keep people and animals 50 feet (15 metres) away 
in all directions.
4. INSPECT  YOUR  TRIMMER  AND  ATTACHMENTS
BEFORE  EACH  USE  -  Never  use  unless  all  blade-
attaching hardware is properly installed.
5. BLADE COASTS AFTER THROTTLE IS RELEASED
- A coasting blade can cut you or bystanders. Before
performing any service on the blade, always turn off
engine, and be sure coasting blade has stopped.
6. 50-FOOT (15 metres) DIAMETER HAZARD ZONE -
Bystanders  can  be injured.Keep people and anima- 
 
ls 50 feet (15 metres) away in all directions.
1. DO NOT USE ANY OTHER FUEL than that recom-
mended in your manual. Always follow instructions in
the Fuel and Lubrication section of this manual. Never
use petrol  
unless it is properly mixed with 2-cycle
engine  lubricant. Permanent  damage  to  engine  will
result, voiding manufacturer’s warranty.
2. DO NOT SMOKE while refueling or operating equip-
ment.
3. DO  NOT  OPERATE  UNIT  WITHOUT  A  MUFFLER
and properly installed muffler shield.
4. DO NOT TOUCH or let your hands or body come in
contact with a hot muffler or spark plug wire.
5. DO  NOT  OPERATE  UNIT  IN  AWKWARD  POSI-
TIONS, off balance, outstretched arms, or one-hand-
ed. Always  use  two  hands  when  operating  unit  with
thumbs and fingers encircling the handles.
6. DO NOT RAISE TRIMMER HEAD above ground level
while unit is operating. Injury to operator could result.
7. DO NOT USE UNIT FOR ANY PURPOSES OTHER
than trimming lawn or garden areas.
8. DO NOT OPERATE UNIT FOR PROLONGED PERI-
ODS. Rest periodically.
9. DO  NOT  OPERATE  UNIT  WHILE  UNDER  THE
INFLUENCE OF ALCOHOL OR DRUGS.
10. DO  NOT  OPERATE  UNIT  UNLESS  CUTTING
ATTACHMENT  GUARD AND/OR  GUARD  IS
INSTALLED AND IN GOOD CONDITION.
11. DO NOT ADD, REMOVE OR ALTER ANY COMPO-
NENTS  OF THIS  PRODUCT. Doing  so  could  cause
personal  injury  and/or  damage  the  unit  voiding  the
manufacturer’s warranty.
12. DO NOT operate your unit near or around flammable
liquids or gases whether in or out of doors. An explo-
sion and/or fire may result.
13. DO NOT USE ANY OTHER CUTTING ATTACHMENT.
Use only McCulloch replacement parts and accessor-
ies, which are designed specifically to enhance the
performance and maximize the safe operation of our
products. Failure  to  do  so  may  cause  poor  perform-
ance  and  possible  injury. Use  only  the  cutting  head
supplied with this product.
Do not use any other cut-
ting  attachment. Use  of  such  attachments  will  void
your factory warranty and could result in serious bod-
ily injury.
WHAT NOT TO DO 
BRUSH / GRASS BLADE SAFETY PRE-
CAUTIONS
GB
GB
GENERAL SAFETY RULES
WARNING! When using petrol powered tools, basic safety precautions, including the following, should always be followed 
to reduce the risk of serious personal injury and/or damage to the unit.
Read all these instructions before operating this product and save these instructions.
WARNING! This machine produces an electromagnetic field during operation. This field may under some circumstances 
interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with 
medical implants to consult their physician and the medical implant manufacturer before operating this machine.
READ  YOUR  USER  MANUAL  AND  ALL  SUPPLE-
MENTS (IF ANY ENCLOSED) THOROUGHLY BEFORE
OPERATING YOUR UNIT.
1.
Wear  close  fitting, tough  work  clothing that  will
provide  protection,  such  as  long  slacks  or  trousers,
safety work shoes, heavy duty work gloves, hard hat,
a safety face shield, or safety glasses for eye protec-
tion  and  a  good  grade  of  ear  plugs  or  other  sound
barriers for hearing protection.
2.
Refuel in  a  safe  place. Open  fuel  cap  slowly  to
release any pressure which may have formed in fuel
tank. To   prevent a fire hazard, move at least 10 feet
(3 metres) from fueling area before starting.
3.
4.
Turn unit off before setting it down.
5.
Always  hold  unit  firmly  with  both  hands, the
thumb and fingers encircling the handles.
6.
Keep all screws and fasteners tight. Never operate
your equipment when it is improperly adjusted or not
completely and securely assembled.
7.
Keep handles dry, clean and free of fuel mixture.
8.
Keep trimmer head as close to ground as practical.
Avoid hitting small objects with trimmer head. When
cutting on a slope, stand below trimmer head. NEVER
cut or trim on a hill or slope, etc. If there is the slightest
chance of slipping, sliding or losing firm footing.
9.
Check  area  you  will  be  trimming  for  debris that
may be struck or thrown during operation.
10.
Keep all parts of your body and clothing away
from trimmer head when starting or running
engine. Before starting engine, make sure trimmer
head will not come in contact with any obstacle.
11.
Stop engine before examining cutting line.
12.
Store  equipment  away  from  possible  ignition
sources, such  as  gas-powered  water  heaters,
clothes  dryers,  or  oil-fired  furnaces,  portable
heaters, etc.
13.
Always  keep the debris shield, trimmer head, and
engine free of debris build-up.
14.
Operation of equipment should always be restricted
to mature and properly instructed individuals.
15.
WARNING: The emission of exhaust gases is toxic.
16. Emergency  Stopping  Procedure. When  it  is  neces-
sary  to  stop  engine  immediately,  DEPRESS  the
switch to stop.
17. This unit has a clutch. The routine for checking that
the clutch is working correctly is that when the engine
returns to idle the trimmer head stops spinning.
WARNING: Keep  children,  bystanders,  and
animals  50  feet  (15  metres)  away. If
approached stop unit immediately.
WHAT TO DO 
112
15m(50ft)
Comply with all fire prevention regulations. Your 
unit comes with a spark arrester screen furnished in 
the user kit.Replacement spark arrester screen kits 
are available from distributor.
Tighten the cap of oil and fuel tank to prevent the loss 
of oil and fuel during transport
18.
It is recommended that daily inspection before use 
and after dropping or other impacts to prevent 
significant damage or defects.
19.
Prolonged use of this product expose the operator to 
vibrations and may produce ‘whitefinger’ disease. In 
order to reduce the risk, please wear gloves and 
keep your hands warm. If any of the ‘whitefinger’ 
symptoms appear, seek medical advice immediately.
20.
Sound pressure level at 7,5 metres.