McCulloch T22LS Manuale Utente

English

 –

 11

•

Fit the correct trimmer guard (A) for use with the 
trimmer head. Hook the trimmer guard/combination 
guard onto the fitting on the shaft and secure with the 
bolt (L).

•

Fit the drive disc (B) on the output shaft.

•

Turn the blade shaft until one of the holes in the drive 
disc aligns with the corresponding hole in the gear 
housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Screw on the trimmer head/plastic blades (H) in the 
opposite direction to the direction of rotation.

•

To dismantle, follow the instructions in the reverse 
order.

•

Fit the guard as shown in the diagram. Tighten 
securely.

•

Fit the dust cup on the shaft. The nut must be 
completely covered by the dust cup.

•

Hold the dust cup with a spanner to prevent the shaft 
from rotating.

•

Screw the trimmer head onto the shaft.