Zenoah CHTZ2401L Manuale Utente

■ STOPPING ENGINE (OP3)
1. Release the throttle lever and run the engine for a

half minute.

2. Shift the ignition switch to the “STOP” position.

• Except for an emergency, avoid stopping the engine

while pulling the throttle lever.

If the engine won't stop when setting the ignition switch
to the stop position, close the choke lever and stop the
engine.
In this case, please repair the machine at your nearest
servicing dealer.

■ RUNNING IN THE ENGINE

• During the first 20 working hours, do not use the

hedge-trimmer at maximum power for long periods.

■ ADJUSTING IDLING SPEED
• Before adjusting the carburetor, clean the air filter

and warm up the engine. (OP5)

• Idle screw is adjusted in order to ensure a good

safety margin between idle running and clutch
engagement. (OP6)