Husqvarna 335L Manuale Utente

10 – 

English

•

Clip the loop handle onto the shaft. Note that the loop 
handle must be fitted between the arrows on the shaft.

•

Slide the spacer into the slot in the loop handle.

•

Fit the nut, knob and screw. Do not overtighten.

•

Now adjust the trimmer to give a comfortable working 
position. Tighten the bolt/knob.

•

Fit the trimmer guard/combination guard (A) intended for 
use with the trimmer head/plastic blades.

Hang the trimmer guard/combination guard (A) on the two 
hooks on the plate holder (M). Bend the guard around the 
shaft and tighten it with the bolt (L) on the opposite side of 
the shaft. Use the locking pin (C). Place the locking pin in 
the groove on the screw head and tighten. See diagram.

•

Fit the drive disc (B) on the output shaft. 

•

Turn the blade shaft until one of the holes in the drive disc 
aligns with the corresponding hole in the gear housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Screw on the trimmer head/plastic blades (H) in the 
opposite direction to the direction of rotation.

•

To dismantle, follow the instructions in the reverse order.