Roland JV-1010 Manuale Utente

Use the tool supplied with the Wave Expansion Board to 
rotate the board holders to LOCK, securing the Wave 
Expansion Board in place.

fig.1-03d.e

Use the (specified) screws you removed in step 2 to reattach 
the cover.

This completes the installation of the Wave Expansion Board. Next, make 
sure the board is installed correctly.

Press the VALUE knob to choose the Patch mode (

).

fig.1-04

Pressing the VALUE knob makes the mode change sequentially. Press the 
knob several times, until the PATCH indicator lights up.

Turn the CATEGORY/BANK knob to choose 

.

fig.1-05

If 

 appears in the display, the Wave Expansion Board has been installed 

correctly.

LOCK

When a Wave Expansion 
Board is installed, then 
when you switch on the 
power first 

 

is displayed, and after that 
the final two digits of the 
model number for the 
installed Wave Expansion 
Board flash twice on the 
display.

For example, when the SR-
JV80-02 “Orchestral” Wave 
Expansion Board is 
installed, 

 flashes twice 

on the display.

If the display shows 

, 

it’s likely that the Wave 
Expansion Board is not 
being recognized correctly. 
Follow the steps in 

the power, then reinstall 
the Wave Expansion Board, 
making sure you do it 
correctly.