Roland JV-1010 Manuale Utente

To play rhythm sets using a MIDI keyboard, set the MIDI transmit channel 
for the MIDI keyboard to 

.

Here’s how you can play percussion instruments using rhythm sets:

fig.1-19

Set the transmit channel for the MIDI keyboard (the 
transmitting instrument) to 

.

For information on how to make the settings, refer to the owner’s manual 
for the MIDI keyboard (the transmitting instrument).

Press the VALUE knob and choose the Rhythm Set mode 
(

).

Pressing the VALUE knob makes the mode change sequentially. Press the 
knob several times until the RHYTHM indicator lights up.

Turn the CATEGORY/BANK knob and choose a bank. Make 
your selection from the text displayed in white.

fig.1-20

Turn the VALUE knob and choose a rhythm set.

Finger some keys on the MIDI keyboard to play a few notes.

A wide variety of percussion sounds are played, depending on the keys you 
finger.
When MIDI data is received, the MIDI indicator lights up.

You can’t choose a 

 patch unless a Wave 

Expansion Board is 
installed in the slot EXP-B. 
When no Wave Expansion 
Board is installed, 

 

appears on the display.

When you’ve selected the 
Rhythm Set mode, the 
display shows the settings 
for Part 10, no matter what 
setting the PART knob is at.

For more information 
about the onboard rhythm 
sets, take a look at