Roland JV-1010 Manuale Utente

Set the transmit channel on the external MIDI device to the 
same value that you selected for the Performance Control 
Channel (Perform Ctrl CH) in step 4.

For information on how to make the settings, refer to the owner’s manual 
for the MIDI keyboard (the transmitting instrument).

Transmit a Bank Select MSB (Controller Number 0) value 
(refer to the following table) from the external MIDI device to 
the JV-1010.

Transmit a Bank Select LSB (Controller Number 32) value 
(refer to the following table) from the external MIDI device to 
the JV-1010.

Transmit a Program Change message from the external MIDI 
device to the JV-1010 (refer to the following table).

The correspondences between MIDI messages transmitted from external 
MIDI devices and Performance Numbers are as shown below.

USER

1–32

80

0

1–32

PRESET-A

1–32

81

0

1–32

PRESET-B

1–32

81

1

1–32

When changing patches or 
rhythm sets in various 
parts of a performance, set 
the transmit channel of the 
external device and the 
receive channel of the part 
to the same channel. Note 
that when the Performance 
Control Channel and the 
receive channel for the part 
are the same, the setting for 
the Performance Control 
Channel takes priority, and 
the performance is 
switched.