Roland JV-1010 Manuale Utente

Press the VALUE knob to choose the Performance mode 
(

).

Pressing the VALUE knob makes the mode change sequentially. Press the 
knob several times, until the PERFORM indicator lights up.

Turn the PART knob and choose 

.

Set the transmit channel of the external device (the 
transmitting device) to 

.

For information on how to make the settings, refer to the owner’s manual 
for the MIDI keyboard (the transmitting instrument).

Turn the CATEGORY/BANK knob to choose 

.

Now, select the patch category.

Turn the VALUE knob to choose patch 

.

Now, patch 

 in the 

 category is selected 

for 

.

Repeat Steps 2–5, using the same procedure to select other 
parts.

Using a sequencer or computer, play back the song.

For instructions on how to play back songs, refer to the owner’s manual for 
the external device (the transmitting device).

Always make sure that the 
number selected with the 
JV-1010’s PART knob 
matches the transmit 
channel of the external 
device (the transmitting 
device). Additionally, 
remember that 

 is 

used exclusively by the 
rhythm set.

Turning off the JV-1010’s 
power without saving the 
created data results in the 
loss of that data. Save any 
important data that you 
wish to preserve to an 
external MIDI device (p. 

The Performance Control 
Channel (Perform Ctrl CH) 
is preset at the factory to 

; remember that 

patches are switched when 
program changes are 
recorded in a song. To 
release the Performance 
Control Channel (Perform 
Ctrl CH) 

 setting, set to 

something other than 

 

For more information about 
the onboard patches, take a 
look at 

 (p. 67).