Roland VC-2 Manuale Utente
17
Try Out the Sound (Patch mode)
<Algorithm>
: Change the buttons at both edges of the
screen to Patch Algorithm.
< << >
: Return to the preceding screen page.
< >> >
: Advance to the next screen page.
4.
Touch <OK> to select the patch.
Any of the 64 patches in the
current patch bank can be selected
by entering the patch bank and
number using numeric keys [1]–
[8] on the front panel (Patch
Palette).
current patch bank can be selected
by entering the patch bank and
number using numeric keys [1]–
[8] on the front panel (Patch
Palette).
1.
Access the top screen of
Patch mode.
2.
Use NUMBER [1]–[8] to
select a patch.
• You can hold down the [0] button and press [1]–[8] to
register the currently selected patch (including the mic
settings) as a favorite patch.
settings) as a favorite patch.
• You can hold down the [0] button and use the
[BANK-][BANK+] buttons to switch between banks of
the patch palette.
the patch palette.
3.
The Patch Palette screen is displayed while you
hold down the [0] button.
You can specify whether or not a beep tone will be heard
when you touch a valid point on the touch screen. At the
factory setting, the beep tone will be sounded.
when you touch a valid point on the touch screen. At the
factory setting, the beep tone will be sounded.
1.
In the upper right of the screen, touch
<
▼
MENU>.
A pulldown menu appears.
2.
In the pulldown menu, touch <Beep> to add a
check mark (
✔
).
With this setting, the beep tone will be heard. If you
perform the same procedure once again, the check mark
will be cleared and the beep tone will no longer be heard.
perform the same procedure once again, the check mark
will be cleared and the beep tone will no longer be heard.
1.
2.
Select a patch.
3.
While you speak or sing into the mic, turn the
front panel INPUT LEVEL knob to adjust the
volume of the input from the front panel MIC
jack.
Adjust the volume so that the PEAK indicator does not
light.
light.
If you want to make more detailed settings, touch <Mic
Setting> at the bottom of the screen to access the SYSTEM
MIC Setting screen (p. 24).
Setting> at the bottom of the screen to access the SYSTEM
MIC Setting screen (p. 24).
4.
Speak or sing into the mic while you play the
MIDI keyboard.
Processor Type 1
or
Processor Type 2
, you won’t hear
the patch unless you input sound from an external device
connected to the rear panel
connected to the rear panel
INPUT L
in addition to the
mic input.
Keyboard~
, you don’t need to speak or sing into the mic;
the patch will produce sound when you simply play the
keyboard.
keyboard.
Using buttons to select patches
Enabling or Disabling the
Beep Tone
Beep Tone
Playing
vc2_for_XT_e1 17 ページ ２００５年３月８日 火曜日 午後４時５２分