Roland VC-2 Manuale Utente

 

The functions of Chorus parameters are explained.

 

This conventional chorus effect adds spaciousness and depth 
to the sound. Slow modulation frequency with less depth.

 

This conventional chorus effect adds spaciousness and depth 
to the sound. Rapid modulation frequency with less depth.

 

This conventional chorus effect adds spaciousness and depth 
to the sound. Slow modulation frequency with more depth.

 

This conventional chorus effect adds spaciousness and depth 
to the sound. Rapid modulation frequency with more depth.

 

This chorus offers a flanger-like effect, creating a soft sound.

 

This effect sounds somewhat like a jet airplane taking off and 
landing.

 

This is a delay with a short delay time.

 

This is a short delay with many repeats.

 

Pre Low Freq

500–15000 Hz, 
THRU

Frequency of the low range (TH-
RU: no filter is used)

Pre Hi Freq

THRU, 50–800 
Hz

Frequency of the high range (TH-
RU: no filter is used)

Pre Dly Time

0–50.0 ms

Adjusts the delay time from the 
direct sound until the chorus 
sound is heard.

Co LPF Freq

500–15000 Hz, 
THRU

Adjusts the cutoff frequency of 
the low pass filter. (THRU: no fil-
ter is used)
The effect will be applied to the 
frequency range below the cutoff 
frequency.

Co HPF Freq

THRU, 50–800 
Hz

Adjusts the cutoff frequency of 
the high pass filter. (THRU: no 
filter is used)
The effect will be applied to the 
frequency range above the cutoff 
frequency.

Rate

0.05–10.0 Hz, 
note

Sets the cycle for the chorus or 
flanger sound undulations.

Depth

0–127

Adjusts the depth of modulation 
for the chorus or flanger.

Feedback

-98– +98 %

Adjusts the proportion of the ef-
fect sound that is fed back into 
the effect. Negative (-) settings 
will invert the phase.

Cho/Flg Sw

CHORUS, 
FLANGER

Selects either chorus or flanger.

vc2_for_XT_e1 61 ページ ２００５年３月８日　火曜日　午後４時５２分