Roland VC-1 D-50 Manuale Utente
35
Transferring Patches To and From the D-50/550
10.
Touch
<OK>
. The bulk dump starts. If you want to cancel without executing, touch
<Cancel>
.
11.
When the data transfer is completed, the D-50’s display shows “
Complete
.”
12.
Press the
[EXIT]
button on the D-50 to return to the play mode.
In addition to the patches (64 patches),
16 reverb types (17–32
are also saved to the VC-1’s patch banks
(Pre 1–6, Int 1–8). Different reverb types
17–32
are saved to each patch bank. The reverb types you can
use vary with the selected patch as described below.
fig.04-06ae(ReverbTypeImage)
• All shared common reverb types (1–16) can be used.
• The reverb types
17–32
in individual banks can be used only
with the patches (64 patches) contained in that bank.
• Reverb types from a bank other than the internal banks (any
from 1 through 32) can be copied to a reverb type in the internal
banks (any from 17 through 32).
banks (any from 17 through 32).
• This is convenient when, for example, you want to use Reverb
Type 25 (Gate Reverb) from the Patch Bank
Pre 1
as Reverb
Type 30 in the Patch Bank
Int 1
.
*
Reverb Types (17–32) are transferred simultaneously with patch data
when patch data is transferred from the D-50 to the VC-1 (bulk loaded)
or from the VC-1 to the D-50 (bulk dumped).
when patch data is transferred from the D-50 to the VC-1 (bulk loaded)
or from the VC-1 to the D-50 (bulk dumped).
fig.04-04(LCD_ModeMenu_DataTrans)
1.
Press
[MODE]
on the VC-1. The
MODE MENU
window appears.
2.
Touch
<DATA TRANSFER>
. The
DATA TRANSFER
screen
appears.
Copying a Reverb Type
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
Common
Reverb Type
(NOT rewritable)
17 18 19 20
21 22 23 24
25 26 27 28
29 30 31 32
Pre1
Reverb Type
(NOT rewritable)
17 18 19 20
21 22 23 24
25 26 27 28
29 30 31 32
Int1
Reverb Type
(rewritable)
Internal Bank
Preset Bank
vc1_for_XT_e1 35 ページ ２００５年３月８日 火曜日 午後１２時５５分