Atlas Sound TSD-SEQ6 Manuale Utente

1601 Jack McKay Blvd. • Ennis, Texas 75119  U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

8.  EPD “Emergency Power Down” Port - When an urgent system shut down is required, short the  

  two pins together and the sequence portion will be bypassed and turn Off all outputs at the same    

  time. This EPD feature is commonly used with fire control systems.

9.  Delay Pot for Sequence 1 Output - The time between Sequence 1 Output and Sequence 2  

 

  Output can be set by rotating the pot following the indicators on the panel. In X1 mode the delay    

 time adjustment is from 1 second to 60 seconds. In X10 mode the delay time adjustment is from  

 10 seconds to 600 seconds, or 10 minutes. See the Function Settings below for Sequence 1 Output 

  X1 or X10 configuration.

10. Delay Pot for Sequences 2-6 - The time between Sequence 2 Output and Sequence 6 Output can    

 be set by rotating the pot following the indicators on the panel. Whatever the time is set to will be  

  the time between Sequenced outputs.

11. Cable Management Retainer Points - Use the rear panel screws for connecting the included cable  

  retainers. Each TSD comes with two cable retainers for simplified cable management.

 •  DIP SW # 1-6 - Channel Output Assignment - Each output can be assigned to deliver a Hard

    Switch Contact Closure (CC) or +24VDC output when activated by the Sequence for Output  

 

  Channels 

1-6.

 •  DIP SW # 7 - Link Assignment Configuration - This switch determines if the unit is to be a

    Master or a Slave unit. The Master unit is always the first in line of the sequence.

 •  DIP SW # 8 - Sequence Output 1 Time Delay - In the X1 setting the adjustable time delay setting

    is from 1s to 60s and in the X10 position the time delay setting is from 10s to 600s, or 10 minutes.

There are three ways to securely mount this TSD:

1. Velcro™ -  Each unit includes industrial-grade Velcro™ with adhesive backing to adhere to any  

  flat surface.

2.  Brackets - Each unit includes two mounting brackets to secure to a cabinet or wall.

3.  Rack Mount Panel - The optional TSD-RMK rack mount panel supports up to four TSDs in a

  1RU space.