GE DVMRe 4eZT Manuale Utente
0150-0198H
8
DVMRe Triplex eZ
Ten and Sixteen-Channel Units
Password
Type
Access
Level
Function
Changeable
by user?
Default
Password
Operator Operator
Provides access to the Operator
menu.
Yes
Press ‘ENTER’
4 Times
Installer
Installer
Provides access to all on-screen
menus.
Yes
3 4 7 7
Factory
Defaults
Installer
Resets the multiplexer to the
factory defaults (except the time,
date, email addresses, and email
IP address).
No
8 1 1 1
Language Installer
Provides access to the On-screen
Language menu.
No
5 4 1 5
Ethernet
Access
Reset
Installer
Deactivates the ethernet
password, so that any PC
equipped with WaveReader may
access the unit.
No
1 1 1 1
1.4 Unpacking
Check the package and contents for visible damage. If any components are damaged or missing, do
not attempt to use the unit, contact the supplier immediately. If the unit must be returned, it must be
shipped in the original packing box.
shipped in the original packing box.
Package Contents
•
The DVMRe Triplex eZ unit.
•
The Alarm Interface Circuit Board (P/N 0090-0077).
•
The User Manual (P/N 0150-0198).
•
Accessory PCB (P/N 0900-0127). Audio equipped models only.
•
A WaveReader Software CD (P/N 0151-0005-25W11).
•
The WaveReader Software Manual (P/N 0150-0143).
•
The Archiving Addendum (P/N 0150-0194).
•
WaveWatch User Manual (P/N 0150-0189).
•
Power Supply (P/N 4310-0020).
•
Power Cords (120 VAC P/N 4310-0002) and (220 VAC P/N 4310-0001).
1.5 Installation Environment
Power: Ensure that the installation site’s AC power is stable and within the rated voltage of the 12
Volt DC power supply. If the site’s AC power is likely to have spikes or power dips, use power line
conditioning or an Uninterruptable Power Supply (UPS).
conditioning or an Uninterruptable Power Supply (UPS).
Ventilation: Ensure that the location planned for the installation of the unit is well ventilated. Take
note of the locations of the cooling vents in the unit’s enclosure, and ensure that they are not
obstructed.
note of the locations of the cooling vents in the unit’s enclosure, and ensure that they are not
obstructed.
Temperature: Consider the unit’s operating temperature (0 to 40 °C) and non-condensing humidity
specifications (10% to 80%) before choosing an installation location. Extremes of heat or cold beyond