National Instruments SCC-LP03 Manuale Utente
© National Instruments Corporation
3
SCC-LP Series Lowpass Filter Modules User Guide
What You Need to Get Started
To set up and use the SCC-LPXX, you need the following items:
❑
SC-2345/2350 with one of the following:
–
SCC-PWR01
–
SCC-PWR02 and the PS01 power supply
–
SCC-PWR03—requires a 7 to 42 VDC power supply (not
included)
included)
❑
One or more SCC-LPXX
❑
SCC-LP Series Lowpass Filter Modules User Guide
❑
SC-2345/2350 User Manual, available at
ni.com
❑
SCC Quick Start Guide, available at
ni.com
❑
Read Me First: Safety and Radio-Frequency Interference
❑
SC-2345 Quick Reference Label
❑
68-pin E Series DAQ device, documentation, and 68-pin cable
❑
1/8 in. flathead screwdriver
❑
Numbers 1 and 2 Phillips screwdrivers
❑
Wire insulation strippers
❑
NI-DAQ (current version) for Windows 2000/NT/XP/Me
Note
Software scaling of measurements is not supported on the Macintosh operating
system. Refer to the
section for
more information.