Lightolier C6E17OHW Dépliant

Job Information

Type:

Job Name:
Cat. No.:

Lamp(s):
Notes:

a Genlyte Thomas Company

www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504

1. Upper Reflector: Clear anodized aluminum, 0.040" (16-ga.). Provides 

wide beam distribution; can be removed for accessibility, inspection and 
maintenance of ballast/junction box assembly. 

2. Aperture Cone: Provides 55° visual cut-off to lamp and lamp image; 

self-flange in painted white or aperture-matching polished flange. Consult
factory for other finishes.

3. Socket Cup: Galvanized steel, pre-wired with medium base pulse rated 

socket. Snaps onto upper reflector for secure attachment without tools; 
unitized construction assures proper lamp alignment to optics for consistent
performance.

4. Mounting Frame: 0.048" (18-ga.) galvanized steel includes pre-installed

mounting bars.

5. Mounting Ring: 0.048" (18-ga.) galvanized steel. Designed for vertical

adjustment from above or below for ceilings from 0" to 2" thick. Center-line
notches allow consistent alignment of multiple fixtures

6. Aperture Cone Retention Springs: Rust resistant springs secure cone in

place for quick, tool-less installation.

7. Frame Vertical Adjustment Mechanism: Vertical adjustment mechanism

accommodates mounting to virtually any ceiling system using pre-installed
mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures
all adjustments. Alignment holes and markings allow fixture to be pre-set
prior to installation.

8. Mounting Bars: 0.048" (18-ga.) Pre-installed, telescoping bars extend to 30"

long and lock securely into position. Built-in locking tabs provide positive
attachment to common T-bar systems. Self-centering feature simplifies 
installation in 24" O.C. grid systems. Attaches to steel or wood joists without
accessories.

9. Ballast: Electronic 120V or 277V. Magnetic dual voltage (120V & 277V).

Accessible from below for inspection and/or replacement without tools.

10.Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,

90°C through branch circuit conductors; allows inspection from below.

11.Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not

install insulation above nor within 3" (76mm) of any part of the luminaire.

Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high-power factor,
T.H.D. <15%, thermally and transient protected, RMI / RFI complies with FCC
Part 18 non-consumer equipment, shut-down circuit at end of lamp life, sound
rating "A", -5°F minimum starting temperature, Type 1 outdoor rating.

Ceiling Cutout: 6 9/16” (167 mm) Dia.

Specular Clear, White Painted Flange.

Specular Clear, Matching Flange.

Comfort Clear Diffuse, White Painted Flange.

Comfort Clear Diffuse, Matching Flange.

Champagne Bronze, White Painted Flange.

Champagne Bronze, Matching Flange.

Electronic, 120V

70W E17, ED17, BD17 (Open Rated)

Electronic, 277V

70W E17, ED17, BD17 (Open Rated)

Electronic, 120V

100W E17, ED17, BD17 (Open Rated)

Electronic, 277V

100W E17, ED17, BD17 (Open Rated)

Magnetic, 120V/277V 70W E17, ED17, BD17 (Open Rated)

Magnetic, 120V/277V 100W E17, ED17, BD17 (Open Rated)

70W MH

M98/M139

120/277

0.67/0.29

78

100W MH M90/M140

120/277

0.90/0.43

110

Magnetic Ballast: 120/277V dual voltage, 60 Hz., encased and potted, 
HX-HPF circuit type, high power factor, sound rating “B”, -20°F minimum 
starting temperature, Type 1 Outdoor rating.

70W MH

M98/M143

120/277

1.90/0.80

94

100W MH M90/M140

120/277

2.40/1.10

125

Auxiliary: Add suffix A to Frame-In Kit and Reflector Trim. See Spec.Sheet “A/E”
Emergency Lamp: Add suffix E to FIK and Reflector Trim. See Spec.Sheet “A/E”
Slope Ceiling Adapters: See Specification Sheet SCA.
Fuse (magnetic ballast): Add suffix F1 or F2 to Frame-In Kit (F1=120V F2=277V)
Chicago Plenum: Consult Factory.

UL (Suitable for Damp Locations), CSA, I.B.E.W.
For 100W Electronic, install fixtures with minimum spacing: 2 feet from center-to-
center of adjacent luminaries; 1/2 inch from top of luminaire to overhead building 
member; 1 foot from luminaire center to side building member.

Calculite

®

HID Downlight

Page 1 of 2

6” Aperture, ED17 (Open Rated), Ceramic Metal Halide, Wide Beam