John Deere AT-3107-J Manuale Utente

      

 1-Inch High Torque Impact Wrench Operator's Manual   

                  

5  

Impact resistant eye protection should meet or ex-

ceed the standards as set forth in the United States 

ANSI Z87.1, Occupational and Educational Eye and 

Face Protection. Look for the marking Z87.1 on your 

eye protection to insure that it is an approved style. 

For further information, ANSI Z87.1, Occupational 

and Educational Eye and Face Protection, is avail-

able from the American National Standards Institute, 

Inc., 11 West 42nd Street, New York, NY 10036.

Hearing protection should be used when the noise 

level exposure equals or exceeds an 8 hour time-

weighted average sound level of 85 dBA. Process 

noise, reflective surfaces, other tools being operated 

nearby, all add to the noise level present in your 

work area. If you are unable to determine your noise 

level exposure, we recommend the use of hearing 

protection.

It is advisable, when using this tool for extended 

periods of time, to wear a protective mask. This will 

help prevent the inhalation of the fine dust produced 

while using this tool. Prolonged breathing of dust 

particles may lead to future respiratory problems.

Some dust created by power sanding, sawing, 

grinding, drilling and other construction activities 

contain chemicals known to cause cancer, birth 

defects or reproductive harm. Some examples of 

these chemicals are:

• 

Lead from lead-base paints

• 

Crystalline Silica from bricks, cement and other  

 

masonry products.

• 

Arsenic and Chromium from chemically treated  

 

lumber.

Your risk from these exposures varies, depending 

on how often you do this type of work. To reduce 

your exposure to these chemicals, work in a well 

ventilated area and work with approved safety 

equipment such as those dust masks that are 
specially designed to filter out microscopic particles.